Search results for "Electrical contacts"
showing 10 items of 12 documents
Size dependence of the Josephson critical behavior in pyrolytic graphite TEM lamellae
2014
We have studied the transport characteristics of TEM lamellae of different widths obtained from a graphite sample with electrical contacts at the edges of the embedded interfaces. The temperature dependence of the resistance, as well as the current-voltage characteristics, are compatible with the existence of Josephson-coupled superconducting regions. The transition temperature at which the Josephson behavior sets in decreases with a decreasing interface width and vanishes for widths below 200 nm. This interface-size dependence provides an explanation for differences observed in the transport behavior of graphite-based samples with interfaces, and it appears to be related to the influence o…
Long term stability testing of oxide unicouple thermoelectric modules
2019
Thermoelectric devices based on oxides are good candidates for energy harvesting technologies for use in aggressive conditions where the materials should withstand high temperatures and corrosive environments over prolonged time. This leads to a natural concern for the stability of the electrical contacts, especially on the hot side of the module. In this work, we have assembled several prototype unicouple thermoelectric modules made by pyrolyzed and spark plasma sintered n-type CaMnO3 and p-type Ca3Co4O9 and then tested under different conditions mimicking end-user applications. For baseline experiments we have chosen to use nickel as the contact material in order to show the effect of its…
Fabrication of Electrical Contacts on Pyramid-Shaped NTD-Ge Microcalorimeters Using Free-Standing Shadow Masks
2011
In our effort to fabricate arrays of germanium microcalorimeters for X-ray detection, a truncated square-based pyramid shape has been identified as a suitable geometry for the sensors. It allows to obtain a uniform current spreading across each sensor, and represents a good compromise between having a large support area for the radiation absorber and for maintaining an overall small bolometer volume. This three-dimensional geometry, however, does not allow to create the electrical contacts for the sensors using a regular photoresist-based lift-off metallization process. In this paper we show how to deposit metal contacts on the lateral faces of the pyramidal sensors by metal evaporation thr…
Comparison between Focused Electron/Ion Beam-Induced Deposition at Room Temperature and under Cryogenic Conditions
2019
This article belongs to the Special Issue Multi-Dimensional Direct-Write Nanofabrication.
Electrical properties of Au/CdZnTe/Au detectors grown by the boron oxide encapsulated Vertical Bridgman technique
2016
Abstract In this work we report on the results of electrical characterization of new CdZnTe detectors grown by the Boron oxide encapsulated Vertical Bridgman technique (B-VB), currently produced at IMEM-CNR (Parma, Italy). The detectors, with gold electroless contacts, have different thicknesses (1 and 2.5 mm) and the same electrode layout, characterized by a central anode surrounded by a guard-ring electrode. Investigations on the charge transport mechanisms and the electrical contact properties, through the modeling of the measured current–voltage ( I – V ) curves, were performed. Generally, the detectors are characterized by low leakage currents at high bias voltages even at room tempera…
Carrier Transport in GaAs Nanowires Using Surface Acoustic Waves
2012
ABSTRACTThe oscillating piezoelectric field of a surface acoustic wave (SAW) is employed to transport photoexcited electrons and holes in GaAs nanowires (NWs) transferred to a SAW beam line on a LiNbO3 crystal. We show that carriers generated in the NW by a focused light spot can be acoustically transported to a second location, where they recombine emitting short light pulses. The results presented here demonstrate the high-frequency manipulation of carriers in NWs without the use of electrical contacts, which opens new perspectives for applications in opto-electronic devices operating at GHz frequencies.
Improved electroless platinum contacts on CdZnTe X- and γ-rays detectors
2020
AbstractPlatinum is a promising candidate for the realization of blocking electrical contacts on cadmium-zinc-telluride (CdZnTe or CZT) radiation detectors. However, the poor mechanical adhesion of this metal often shortens the lifetime of the final device. In this work, a simple and effective procedure to obtain robust platinum contacts by electroless deposition is presented. Microscopical analysis revealed the final thickness and composition of the contact layer and its adhesion to the bulk crystal. The blocking nature of the Pt-CdZnTe junction, essential to obtain low noise devices, was confirmed by current–voltage measurements. The planar Pt-CdZnTe-Pt detectors showed good room temperat…
Capacitance study of thin film SnO2:F/p-type a-Si:H heterojunctions
2011
Abstract We characterized SnO 2 :F/p-type a-Si:H heterojunctions by current-voltage (I-V) and capacitance-voltage (C-V) measurements at room temperature to determine the junction parameters. Samples with circular geometry and different diameters were characterized. The current scales with the junction area, and the current density J as a function of the voltage V is a slightly asymmetric curve with a super-linear behaviour (cubic law) for high voltages. Using a transmission line model valid for devices with circular geometry, we studied the effects of the SnO 2 :F resistivity on the measured capacitance when the SnO2:F layer works as an electrical contact. The measured C-V curve allows us t…
Characterization process to measure the electrical contact resistance of Gas Diffusion Layers under mechanical static compressive loads
2016
AEM2016. International conference on Advanced Energy Materials, University of Surrey, Guildford, ROYAUME-UNI, 12-/09/2016 - 14/09/2016; Recent research has identified the mechanical properties of the fuel cell internal components (in particular, the Gas Diffusion Layers - GDLs) as key-parameters to obtain high final performances of the generator. The mechanical compression modulus of these components, the stability of their mechanical properties with respect to temperature and humidity, and their ability to interact with water have an impact on the electrical contact resistances in the stack and, by consequence, on the overall performance of the electric generator. Reducing the losses by co…
Pd/Au/SiC Nanostructured Diodes for Nanoelectronics: Room Temperature Electrical Properties
2010
Pd/Au/SiC nanostructured Schottky diodes were fabricated embedding Au nanoparticles (NPs) at the metalsemiconductor interface of macroscopic Pd/SiC contacts. The Au NPs mean size was varied controlling the temperature and time of opportune annealing processes. The electrical characteristics of the nanostructured diodes were studied as a function of the NPs mean size. In particular, using the standard theory of thermoionic emission, we obtained the effective Schottky barrier height (SBH) and the effective ideality factor observing their dependence on the annealing time and temperature being the signature of their dependence on the mean NP size. Furthermore, plotting the effective SBH as a fu…